Diesel Technology Tool List
Below are the descriptions and sizes of all tools needed for the student to begin on the first day of school. Students may purchase any brand or quality. The tools should be available on the first day of classes. Venders stop in by-weekly thereafter, from Snap-On and other brands give a substantial discount, and Mac who also gives a discount. The student will also purchase three uniform shirts. These can be purchased through the Canby Store or ordered ahead of time with an order form. An order will also be placed the first week of school for anyone who has not ordered uniform shirts in advance. The Diesel Department pays for the personalizing campus imprinting on the left chest and your designated name on the right chest. These shirts are of high quality, semi-acid resistant, priced competitively and wear very well.
- 1/4 in. Square Drive 6-Point 1/4 in. to 1/2 in. Standard & Deep Socket Set
- 4 in. Extension
- 1/4 in. Ratchet Handle
- 6 in. Breaker Bar
- 1/4 in. Drive 6-Point Metric Standard and Deep 4mm to 13mm Socket Set
- 3/8 in. Square Drive Standard and Deep 1/4 in. to 13/16 in. Socket Set
- 5/8 in. Plug Socket
- 3/8 in. Flex Head Ratchet Handle
- 8 in. Breaker Bar
- 3 in. Extension
- 6 in. Extension
- 1/2 in. Extension
- 3/8 in. Drive Metric 7mm – 22mm Standard & Deep Socket Set
- Universal Drive or Flex Socket Set 3/8 in. Drive
- 1/2 in. Square Drive Standard 12-Point 7/16 in. to 1-1/4 in. Deep & Shorts Socket
Set
- 5 in. Extension
- Ratchet Handle
- Universal Drive
- Breaker Bar 24 in.
- 1/2 in. Metric 13mm to 36mm Standard & Deep Socket Set
- Set of Screw Drivers – Phillips
- Set of Screw Drivers – Square Blade
- Set of Screw Drivers – Torx
- Snap Ring Pliers – 4 pc. Set
- Soft Head Hammer – 32 oz.
- Ballpeen Hammer – 12 oz.
- Blacksmith Hammer – 48 oz.
- Nut Drivers: 1/4 in. to 1/2 in., 6mm to 12mm
- Hex Wrench Sets: English and Metric
- 40 oz. Cross Peen Wood Handle
Additional Tools
- Rolling head alignment bar (3-piece set)/adjustable head prybar set
- Wire Stripper/Crimper
- Trouble Light
- 12-24v Test Light
- Digital Volt Ohm Amp. MultiMeter
- Jumper Wire Set
- O-ring Pick Set Small
- Pliers –diagonal, needle nose, common and battery pliers, vice grip, channel lock pliers
- Go-no-Go thickness Gauge set, Tire Valve core tool, Tire Pressure Gauge, an Air Blower (35 p.s.i.), round Spark Plug Gauge, and Wire Brush
- Oil Filter Wrenches – band type
- Combination Wrench set 1/4 in. to 1-1/4 in. & Combination Metric Wrench Set 6mm to 19 (20-32mm) optional
- 3/8 in. Drive Hex Drivers 1/4 in., 5/16 in., 3/8 in., 8mm and T40, T45, T50, T55, and T60 Torx Drivers
- Hack Saw, Screw Starter, Putty Knife or Carbon Scraper, Smooth File, Punch and Chisel Set with Alignment Bar and Brass Drift Punch, Back Probe pin kit, 6” steel ruler
Each student must have a Tool Box. A Roller Cabinet (3-drawer minimum) is preferred, although a top box with minimum size of 26” x 12” x 15” and at least five drawer capacity is acceptable.
Approximate Tool Purchase Value: $2500 to $6000